2013 Chevy Sonic LED STROBE Brake Light

2012 - 2019 Chevy Sonic

Have you thought about upgrading those low light halogen brake lights in your Chevy Sonic for brighter lights?! Look no further, we have provided step by step installation for our Strobe LED Brake Lights in a 2013 Chevy Sonic. Come take a look at how our Strobe LED bulbs feature a flashing effect before brake lights stay on. In this installation for vehicle, no wiring or load resistors required!

*We strongly recommend to confirm all bulb sizes required in your vehicle by checking stock bulbs for part number. The part number required will be located on original halogen bulb from vehicle housing directly*

Bulb size installed in in vehicle brake light application is 7443 halogen bulb size *bulb sizes may vary*

LED bulb part number: STR-7443-5730-33SMD (red / white available)

Compatible Vehicles: 2012 – 2019 Chevy Sonic 

Tools Required: A drill would be recommended (not required)

 Below we will show you how to install our ALLA Lighting    STROBE LED bulbs: 

Step 1)

With trunk open, remove screw 1 and screw 2

2013 Chevy Sonic LED STROBE Brake Light 17
2013 Chevy Sonic LED STROBE Brake Light 18
Step: 2)
Grip 1 hand on top and 1 hand on bottom of assembly to pull assembly straight out
2013 Chevy Sonic LED STROBE Brake Light 19

Step: 3)

    Twist brake light (top bulb) counter clock-wise and    remove from housing

2013 Chevy Sonic LED STROBE Brake Light 20

Step: 4)

Pull halogen bulb out of wiring harness

2013 Chevy Sonic LED STROBE Brake Light 21

Step: 5)

Insert LED bulb into wiring harness

2013 Chevy Sonic LED STROBE Brake Light 22

Step: 6)

Insert LED bulb back into light housing and twist clock-wise

2013 Chevy Sonic LED STROBE Brake Light 23
Step: 7)
Replace headlight assembly and push in until clicks
 *replace both screws (step 1)*
2013 Chevy Sonic LED STROBE Brake Light 24

Check out our Step by Step installation video!

Congratulations!! Your installation is now complete in your 2012 – 2019 Chevy Sonic. If you experienced any issues in which unable to complete installation please contact us for assistance. If the LED bulbs are experiencing hyper-flashing, flickering, error code issues, then load resistors for this application will be required to be installed in your. These issues occur due to the LEDs low current nature which draws much less current than original stock halogen bulbs.

Please feel free to contact us at service@allalighting.com for assistance. Our team of highly trained representatives will be available to assist and provide best solution. May also visit us at www.allalighting.com 

Looking for more LED upgrades for your vehicle. Check out the below bulb guide!  For your reference only. All information below is not 100% guaranteed accurate. Please check the vehicle owner’s manual before purchasing. 

2012 – 2019 Chevy Sonic Exterior Lights:
2012 – 2019 Chevy Sonic Interior Lights:

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: