921 Honda Accord LED Reverse Light Install

Honda Accord 2013 - 2017 reverse light with LED bulbs

Do you have a Honda Accord and noticed the low amount of light when using your halogen reverse bulbs? Maybe you always find yourself struggling to back out of a parking space or struggling to reverse out of your driveway because you just can not see the road behind you.

How about trying to reverse in severe weather conditions and almost hitting that person you “did not” see?  Using those dingy halogen reverse bulbs in your vehicle can do that to your vision therefore ALLA Lighting is here to help! Upgrading your old halogen bulbs of your Honda Accord to new aftermarket LED bulbs can add a great new look to your vehicle as well as enhance  visibility at night for safer driving experience.

When choosing to upgrade your old halogen bulbs to new LED bulbs, it is highly recommended to confirm you have the correct LED replacement bulbs. To confirm LED bulb size, always refer to original halogen bulb size via stock bulbs from your Honda Accord directly. 

Shop by Vehicle: 

https://allalighting.com/pages/bulb-finder-shop-by-vehicle-led-light-bulb-car-truck

*bulb guide – not always 100% correct*

Compatible Vehicles:

2003~2012 Honda Accord Coupe

2013~2022 Honda Accord

Tools used for installation: Flat-head screwdriver

The following information is a step by step instructions on how to install your new 921 LED reverse light

Step #1

Remove clip holding trunk cover

*using flathead screwdriver*

921 Honda Accord LED Reverse Light Install 1

Step #2

Twist halogen reverse light counter clockwise

and remove from housing

Twist reverse light counter clockwise

Step #3

Remove halogen bulb from vehicle socket

921 Honda Accord LED Reverse Light Install 2

Step #4

Insert LED bulb socket connection into

vehicle socket connection

Insert LED bulb into Honda Accord bulb socket

Step #5

Insert LED bulb into light housing

and twist clock-wise

921 Honda Accord LED Reverse Light Install 3

Step #6

Close trunk cover and replace clip *step #1*

Item SKU: 921-CSP-6W

921 Honda Accord LED Reverse Light Install 4
921 Honda Accord LED Reverse Light Install 5
HALOGEN BULBS
921 Honda Accord LED Reverse Light Install 6
LED vs. HALOGEN
921 Honda Accord LED Reverse Light Install 7
LED BULBS
921 Honda Accord LED Reverse Light Install 8

Check out video installation in 2015 Honda Accord:

Congratulations!! Your installation is now complete in your Honda Accord. If you experienced any issues in which unable to complete installation please contact us for assistance. If the  LED bulbs are experiencing hyper-flashing, flickering, an error code issues, then load resistors for this application will be required to be installed. These issues occur due to the LEDs low current nature which draws much less current than original stock halogen bulbs.

Please feel free to contact us at service@allalighting.com for assistance. Our team of highly trained representatives will be available to assist and provide best solution. May also visit us at www.allalighting.com 

Looking for more LED upgrades for your vehicle. Check out the below bulb guide!  For your reference only. All information below is not 100% guaranteed accurate. Please check original halogen bulb size before purchasing. 

2013 – 2017 Honda Accord Exterior Lights:

 

2013 – 2017 Honda Accord Interior Lights:

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: