A simple change can make a big difference. If its the look of your vehicle or safety while driving, upgrading to LEDs is a great choice. If you choose to upgrade Jeep Wrangler brake lights/taillights/rear turn signal lights, it will help to enhance much more visibility at night driving, also give your Jeep a unique look and will be easier noticed by other drivers. It will make your driving SMARTER SAFER BRIGHTER BETTER!
If your Jeep Wrangler brake lights bulb is equipped with stock halogen/incandescent lamps, you will find the light are quite dim, which might make braking or changing lanes potentially hazardous.
Jeep Wrangler brake lights/taillights/rear turn signal lights w/ halogen/incandescent lamps upgrade to wrangler LED brake lights bulbs will be necessary if you are looking for safer & better driving at night. Below we will show you how to install LED turn signal/brake/tail light bulb for 2010-2016 Jeep Wrangler brake lights with halogen tail lamps.
Bulb Sizes for 2007-2021 Jeep Wrangler brake lights bulbs/taillights/rear turn signal lights: 3157/ 3157K (for the vehicle with halogen headlamps)
If you are not sure what bulb sizes or what bulbs can fit your Jeep Wrangler brake lights, turn signal lights, fog lights, taillights, back-up reverse lights, daytime running lights, high and low beam headlights, license plate lights ,side marker lights, exterior and interior lights replacement of the stock dim halogen/incandescent lamps or the damaged bulbs, please click Jeep Wrangler LED Lights Bulbs for fast and easy bulb finder for your luxury Jeep Wrangler lights upgrade: Here please input your Jeep Wrangler’s year, and bulb type for the exact LED lights bulbs.
Lets get started!!
This is just one bulb that will need to be changed for all 3 applications (per side)
Step#1 : Remove the housing (There are 4 Philips screws holding it in, but you only need to remove the 2 inside screws to gain access)
Step#2 : Slide it towards the middle of the car to release the locking tabs (it should pull straight out and it is these 2 tabs that hold it in)
Step#3 : Turn the back of the bulb counter clockwise to unlock it, and pull the bulb out of the connector
Step#4 : Plug the connector back into the housing (Notice the large tab on the bulb, you’ll line this up with the large slot on the housing. And turn it clockwise to lock it in)
Step#5 : Replace the housing back into the car by lining up the locking tabs and sliding it back towards the outside of the car
Step#6 : Replace the 2 screws you had removed
Please check out the complete installation video via the link for step by step video instructions
We hope this is very helpful. If you have any questions or installation issues, feel free to contact us via email firstname.lastname@example.org and one of our helpful representatives will be able to assist.
Below, we also show the bulb sizes for different positions for your reference. *Important: The following information is based on a guide and may not be 100% accurate. We strongly advise to reference your direct vehicle owner’s manual or the stock bulb part number for confirmation before purchase.