Ford F150 headlights bulbs upgrade is a popular trend. While driving your vehicle at night, the most necessary thing is that you have to be in a position to clearly see every object ahead of you. This depends on the illumination capacity of the headlight of your vehicle. (Fast locate Ford F-150 LED Lights Bulbs Guide)
These days, LED headlights are standard in a lot of vehicles. They can be shaped more flexibly and have many other advantages. But this does not apply to older cars. But nevertheless, even if the manufacturer does not offer LED headlights, conversion kits are often available; and they can be installed even without much experience.
The more the illumination, the safer and easier will be your driving. But if your car is not a luxury type, the Ford F150 headlight has to be the standard halogen light or incandescent. Now that the car LED headlights are available as DIY kits, you can change the current one. Before that, you must know how to install LED headlights for Ford F150 headlights upgrade.
Light-Emitting Diode (LED) headlights are lighting fixtures that make use of LED lamp. LED lamps have a better life span and higher lighting efficiency. Some chips can emit over 300 lumens per watt.
They electronically produce light, in contrast to the filament or electrical charge, used in other lighting devices. Therefore, they produce brighter light. Although its initial cost is comparatively higher, it is cost-effective in the long run. Moreover, you will get 90 percent more light compared to the standard bulbs.
The Ford F150 headlights bulbs kit comes with step-by-step installation instructions. Minimal tools are required for installation, and you do not need to have earlier experience of installation. So, you can ‘do it yourself,’ if you feel confident enough. Alternatively, you can take the Ford F150 LED headlight kit to a mechanic or Ford dealership, who will do it for you. The third option is you can ask any of your friends or relatives who has earlier experience of installation.
If you decide to do it yourself, below are some steps, which if you follow strictly, you will have a perfect installation and best result. You must keep in mind that you need an improved light performance. The crystal clear light will be a great asset, added to the value of your vehicle. If you upgrade the Ford F150 headlights, you will not have the risk of discoloration and heat damage that are associated with brighter incandescent bulbs.
You have to choose any of the two styles of LED headlight: the single-beam headlight bulbs or the dual beam one. The single beam bulbs are used either for high beam or low beam. Each headlight assembly has two bulbs, performing each action. In case, you want to have a low beam and high beam; you need two single-beam LED kits. The new headlights should exactly fit your current headlight housing.
Park your car about 20 feet away from your garage door and turn your Ford F150 headlights on. Make a mark of your headlight beams, on a wall by using a tape. Your Ford F150 LED headlight kit contains two bulbs, wiring, two ballasts and terminated connectors.
Take care to secure the ballasts and wiring from any possible damage. You can use a drill or self-tapping screws or a two-sided tape for securing the ballasts.
By popping your hood, pull the existing Ford F150 headlights out, but put utmost care while pulling out. Find out the back of the headlight bulb and take out the wiring connector attached to it with a flat screwdriver. Put on the headlight bulb connector, gently, for releasing it. If you find a metal base on the headlight assembly, fastened by a tension-ed wire, press down on the end of the wire, and then unlock the wire. You can now slide down the headlight, out of its housing.
For protecting yourself and the bulbs, wear clean cotton gloves or use a clean rag or rubber gloves. Make sure that no fingerprint is left on the bulbs. Don’t over tighten, while twisting your headlight and avoid using any tool to assist.
Connect one end of the connector of the ballast to the end of the bulb and the other end to the original wiring of your car. Make sure that two connectors seat perfectly on both sides, by giving gentle tug after connecting
Mount the ballast securely on a flat location of the inner fender, to avoid its bouncing and the consequent damage to the connectors. Mark the mounting holes with a sharpie, drill pilot holes and secure it by using metal screws. Alternatively, you can use self-tapping screws or two-sided tapes.
In case you prefer not to drill your car, prepare the surface with an alcohol swab and allow it to dry before putting the tape. Using zip ties is not safe because the vibration and movement may cause it to loosen and swing around the moving parts.
After starting your car engine, test your headlights to see that it fires right up brightly. Then, for checking its aim, place your car at the same location, where you started working and see if it aims to the same mark made on the wall. If you find any deviation, correct it by resetting it. Ensure the right dispersion of light. If the aim is not correct, you may experience flashes from traffic and also red and blue flashing light behind you.
Your car should automatically turn on the dim lights when it becomes dark. However, remember that your headlight won’t turn on due to some reasons, such as a problem with the fuse, voltage down or problem with the switch. After identifying the exact reason, take immediate remedial measures.
Legal issues and things you need to bear in mind while purchasing and installing
Headlights are safety-relevant components and not only used at night. There are regulations that are strict and do not only apply in every country to ensure the safety of other road users.
As to how to install other application Ford F150 lights bulbs, please click Ford F150 LED lights bulbs for more details.