Table of Contents
How to Replace | Change 2016-2023 Toyota Tacoma Turn Signa Light | Replacement Installation upgrade OEM incandescent or damaged front turn signal lights lamps for vision and safety.
Ready to upgrade your old halogen bulbs? Learn how to replace and complete the installation of LED front turn signal bulbs. Easy installation and tips!
The halogen exterior light bulbs may be too dim in your 2016-2023 Toyota Tacoma, which can make vision difficult, especially in bad weather or severe driving conditions. Upgrading the old halogen bulbs on your Toyota Tacoma with new aftermarket LED bulbs can add a great new look to your vehicle and improve visibility at night for a safer driving experience.
If you choose to upgrade your old halogen bulbs to new LED bulbs, it is best to confirm you have the correct replacement LED bulb by referring to the original bulb or the vehicle’s direct owner’s manual.
We will show you how to install your new ALLA Lighting LED bulbs for your front turn signal light application.
Bulb sizes for the 2021 Toyota Tacoma front turn signal light bulb is # 7443
The following information is step by step instructions on how to install your new Can Bus T20 7440 7443 LED Bulbs Amber Yellow Turn Signal Lights from ALLA Lighting
Step #1
Reach behind the light housing to access the socket.
Step #2
Turn the socket counterclockwise to unlock it.
Step #3
Remove the incandescent bulb.
Step #4
Replace it with the LED and test it.
Step #5
Replace the socket and turn it clockwise to lock it.
Step #6
Now repeat those steps for the other side.
Step #7
Turn the socket counterclockwise to unlock it.
Step #8
Remove the incandescent bulb.
Step #9
Replace it with the LED and test it.
Step #10
Replace the socket and turn it clockwise to lock it.
These new LED bulbs are much brighter than the incandescent bulbs, plus these LEDs are canbus with no error code flickering or hyper flashing.
Check out our Step by Step installation video!
Congratulations! Your LED front turn signal light installation is now complete in your 2021 Toyota Tacoma (also compatible with 2016-2023 Toyota Tacoma front turn signal light). If you experienced any issues during your installation and unable to complete installation, please contact us for assistance. If the LED bulbs are experiencing hyper-flashing, flickering, an error code issues, then load resistors for this application will be required to be installed. These issues can occur due to the LEDs low current nature, which draws much less current than original stock halogen bulbs.
Please feel free to contact us at service@allalighting.com for assistance. Our team of highly trained representatives will be available to assist and provide the best solution. May also visit us at www.allalighting.com
Looking for more LED upgrades for your vehicle. Check out the below bulb guide! For your reference only. All information below is not 100% guaranteed accurate. Please confirm the original bulb part numbers by referring to the original bulb or the vehicle’s direct owner’s manual prior to purchase.
VEHICLE INFORMATION 2021 TOYOTA TACOMA
Front Exterior Lights
Front Fog Light Bulb. Stock #: H16 / LED
Front Sidemarker Light Bulb. Stock #: 12961 (W5W)
Front Turn Signal Light Bulb. Stock #: 7440NA
High Beam and Low Beam Headlight Bulb. Stock #: LED
High Beam Headlight Bulb. Stock #: H9
Low Beam Headlight Bulb. Stock #: H11
Rear Exterior Lights
Back Up Light Bulb. Stock #: 921
Brake Light Bulb. Stock #: 7443
Center High Mount Stop Light Bulb. Stock #: 168
License Plate Light Bulb. Stock #: 12961 (W5W)
Rear Side marker Light Bulb. Stock #: 7443
Rear Turn Signal Light Bulb. Stock #: 7443
Tail Light Bulb. Stock #: 7443
Interior Lights
